Electric chain hoist LP
LPM250, LP500/1000, up to 1600 kg
Reliable and long-lasting
Robust: 3 year warranty
Safe: Chain safety factor minimum 8-times (1-fall in FEM, 2m, ISO, M5)
Weatherproof: Protection class IP65 as standard
Error: Formulario de contacto no encontrado.
LO DESTACADO
ESPECIFICACIONES
LO DESTACADO
Easy to operate
Powerful: 60 % higher lifting capacity
Light: 12 kg dead weight for 400 kg lifting capacity only
Quiet running: with 3-step drive and helical gearing
Simple: Polygonal design for an easy maintenance
Customer specific
Versions D8, D8 Plus, C1 or on customer request
Different operating and control voltages
Second brake without housing extension
Load and path measuremen
ESPECIFICACIONES
Technical specifications
Standard version
Load capacity LPM250 1-fall maximum:
D8: 400 kg, D8 Plus: 250 kg
Load capacity LP500 1-fall maximum:
D8: 800 kg, D8 Plus: 500 kg, C1: 400 kg
Load capacity LP1000 1-fall maximum:
D8: 1600 kg, D8 Plus: 1000 kg, C1: 800 kg
Standard voltages:
3 × 400 V / 50 Hz, 3 × 230 V / 50 Hz,
1 x 115 V / 50 Hz, 1 x 230 V / 50 Hz (only D8 + D8 Plus)
Terminal board for direct control
One lifting speed
Suitable for frequency inverted operation
Housing, chain and equipping parts black
Eyebolt suspension
Usable as stationary or climbing hoist
Protection class IP65
Liquid drain
Isolation class F (motor)
1 (D8) or 2 (D8 Plus + C1) independent DC spring-loaded brakes
Slipping clutch not in the flow of forces
Wear plate as additional chain guidance
Load hook with dampening system
Interlocking hook lug
D8 Plus execution according to DIN 56950/2012 or IGVW SQ P2/2018, with chain safety factor 8:1
Eyebolt suspension with load sensor: output signal 0 – 10 V
Incremental encoder on chain wheel
Integration of PLC controller possible
Geared limit switch with two additional emergency stops
Performance data D8
Performance data D8PLUS
Performance data C1
Customer’s benefit
With a weight of only 12 kg and a lifting capacity of 400 kg, the LPM is the lightest among the electric chain hoists in the entertainment industry. Its low weight, the protection class IP65 and the robust construction with the cover made of aluminum means it is perfectly suited for mobile and outdoor use. The manganese phosphated profile steel chain offers high corrosion resistance and improved dry running properties. The load hook is equipped with a dampening system and a single fall hook clamp which positively follows the hook.
Powerful
The case hardened and manganese phosphated profile steel chain provides about 15 % more capacity at an identical nominal diameter compared to the round steel chain. The higher cross-sectional area reduces wear and increases
the lifetime of the chain. The manganese phosphating improves its corrosion resistance and dry running properties.
Light
LPM, the smallest chain hoist of the LP-family, weighing only 12 kg, lifts up to 400 kg as a D8-hoist. It is modular in design with compact construction which is why it is perfectly suited for the integration in traverses. It offers the option
to equip the hoist as D8-Plus by mounting a second DC-spring-loaded brake on the existing shaft.
Weatherproof
A feature of the hoist is the protection class IP65. It is dust proof and protected against water jets. The LP is perfectly suitable for outside use, even under the most difficult conditions. On open-air events or on concert tours, the rigger will appreciate the weather resistance and reliability of this electric chain hoist.
Quiet
All LP electric chain hoists are equipped with a 3-stage self-contained gear. The helical gearing with geometric optimisation ensures extremely quiet running. This allows the handling of loads during events. Thanks to the protection
provided by the cover and housing the sound pressure level of the LP is only 60 dB. This makes it one of the quietest motors available on the market.
Accessories & options
42 V low voltage control with geared limit switch
Contactor control 24VDC
Other operating and control voltages on request
Two lifting speeds
Hook suspension
Safety load locking hook
Geared limit switch with two additional emergency stops
Radio remote control
Ergonomic control switch
Terminal board with brake contactor
Terminal board with fast switching relay
Second, independent brake
Path measurement
Load measurement
Temperature monitoring
Chain container for various lifting heights
Push trolley and motorised trolley
Handles
Load sensor: output signal 4 – 20 mA (C1)
Preparation for path measurement with incremental or absolute encoder on the drive shaft, without encoder (C1)
Preparation for path measurement with incremental or absolute encoder on the chain wheel, without encoder (C1)
Independent brake monitoring for primary and secondary brake (C1)